Ocean Electronic Tabletop Heater - Manual (Page 6)

OWNER’S MANUAL
4
ASSEMBLY
1-1. Take out all the parts of
the tabletop Heater.
1-2. Aim the cast iron at the
holes on the base.
2-1. Use 4pcs M6X15mm bolts
to fix the tank housing to the
base & cast iron.
2 - 2 . Ti g h t e n t h e b o l t s a s
above show.
3-1. Put the burner on the tank
housing then fix them with
4pcs 3/16” bolts.
4-1. Fix the regulator to the
t a n k
h o u s i n g w i t h t h e
M5X10mm bolt & M5 nut.
STEP 4 STEP 3
STEP 2 STEP 1