Valet take-over – CLIFFORD 20.7 User Manual
Page 17
17
© 2008 Directed Electronics. All rights reserved.
Points to remember
:
If the hood is open or if the brake pedal is pressed, the vehicle will not remote
start.
The remote start shuts down:
When the brake pedal is pressed.
s
The hood is opened.
s
When the remote start command is sent again from a remote control.
s
7HEN
s
'ET
1.
Insert the ignition key and turn it to the ON position.
2.
Now, step on the brake.
3.
The remote control will play the remote start shutdown tone. You have now
taken direct control from the remote start system.
Valet Take-Over
4HE
4O
1 time and the
parking lights will flash after a couple of seconds turn off the ignition and the
CAR