Mounting the speaker contacting cyberdata, Connecting power to the speaker speaker features, Voip speaker assembly – CyberData 010844 User Manual

Page 2

930094J

Quick Reference

930094J

Mounting the Speaker

Contacting CyberData

080169B.dwg

VoIP SPEAKER ASSEMBLY

THUMBNUT (3X)

CEILING

VoIP SPEAKER

SCREW

MOUNTING

8-32x1 1/4" (3X)

ASSEMBLY

#8 FENDER

120°

" HOLE (3x)

120°

WASHER (3X)

#8 NYLON

#6 SCREW (3x)

DRY WALL MOUNTING KIT

TEMPLATE

PLASTIC RIBBED ANCHOR (3x)

DRY WALL MOUNTING KIT

" HOLE

3
8

To mount a speaker:

1. Use the TEMPLATE on the back of this

document to cut a hole in the wall or ceiling,
and prepare holes for the screws.

2. Plug the Ethernet cable into the speaker

assembly. The yellow light verifies the
network connection.

3. For drop ceiling mounting, position the IP

SPEAKER ASSEMBLY

in the ceiling so that

its screw holes align with those you
prepared.

4. For drywall mounting, place the three

PLASTIC RIBBED ANCHORS

in the holes

you prepared, and position the IP
SPEAKER ASSEMBLY

over them, aligning

the screw holes in the assembly with the
anchors.

5. For drop ceiling mounting*, use the three

8-32 x 1 1/4" MOUNTING SCREWS, #8
NYLON THUMB NUTS,

and #8 FENDER

WASHERS

to secure the speaker.

For drywall mounting, use the three #8
SHEET METAL SCREWS

to secure the

speaker.

* For weak ceiling tile, CyberData offers a
reinforcing mount (CyberData part number
010991A).

Corporate Headquarters

CyberData Corporation
2555 Garden Road
Monterey, CA 93940, USA

Phone: 831-373-2601
Fax: 831-373-4193
www.CyberData.net

Sales: (831) 373-2601 ext. 334

Support: 831-373-2601 ext. 333
Email: [email protected]

RMA Dept: (831) 373-2601 ext. 136
Email: [email protected]

Warranty

CyberData warrants its product against defects in material and
workmanship for a period of two years from the date of purchase.
Should the product fail within the warranty period, CyberData will
repair or replace the product free of charge. This warranty includes all
parts and labor. Should the product fail out-of-warranty, a flat rate
repair charge of one half the purchase price will be assessed. Repair
costs for products that are in warranty, but damaged by improper
modifications or abuse, are charged at the out-of-warranty rate.
Products returned to CyberData, both in and out-of-warranty, are
shipped to CyberData at the customer’s expense. Charges for
shipping repaired products to the customer are paid by CyberData.

For product service, contact the Returned Materials Authorization
(RMA) department. A product will not be accepted for return without
an approved RMA number. Send the product, in its original package,
to: CyberData Corporation, 2555 Garden Road, Monterey, CA 93940,
Attention: RMA “your RMA number”

Connecting Power to the Speaker

Speaker Features

PoE Injector (Part #010867A)

Non PoE Hub

RTFM Switch

To broadcast a speaker’s current IP address,
press the RTFM switch on the speaker face.
When the speaker beeps after pressing the
switch for one second, release the switch to
hear the IP address announcement.

Press and hold the RTFM switch for 20
seconds. The speaker will beep after one
second. Continue to hold the switch until the
speaker beeps again after 20 seconds. Then,
release the switch. The speaker settings are
restored to the factory defaults. The speaker
broadcasts the restored default IP address, and
then announces that it is rebooting.

Speaker Volume

Network Link/Activity LED (yellow)

Speaker Status LED (green)

A blinking light confirms that the speaker is
operational.