Clarion DXZ538R - Manual (Page 9)

DXZ538R
13
English
• EXCITE : bass and treble empha-
sized mid de-emphasized
• CUSTOM : user custom
• Z+ OFF : no sound effect
Adjusting the Subwoofer
∗ The factory default setting is “S-VOL 0”
When you select one of the mode (LPF 50, LPF
80, LPF 120).
1. Press the [A-M] button, “S-VOL 0” appears in
the display.
2. Turn the [ROTARY] knob to select from –6 to
+6.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
●When “B-BOOST” is set
“S-VOL 0”
➜ “B-BOOST” ➜ “BAL 0” ➜
“FAD 0”
➜ Last function mode.
●When “IMPACT” is set
“S-VOL 0”
➜ “IMPACT” ➜ “BAL 0” ➜ “FAD
0”
➜ Last function mode.
●When “EXCITE” is set
“S-VOL 0”
➜ “EXCITE” ➜ “BAL 0” ➜ “FAD
0”
➜ Last function mode.
●When “CUSTOM” is set
“S-VOL 0”
➜ “BASS” ➜ “TREBLE” ➜
“BAL 0”
➜ “FAD 0” ➜ Last function mode.
●When “Z+ OFF” is set
“S-VOL 0”
➜ “BAL 0” ➜ “FAD 0” ➜ Last
function mode.
Note:
• As subwoofer is effective, “S-VOL 0” can be
selected.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “BASS”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is “B”. (Ad-
justment range: –6 to +6)
3. Press the [ d] or [a] button to select “B
60>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “B”.(Ad-
justment 60/100/200 Hz)
4. Press the [ d] or [a] button to select “B”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is “B”.(Ad-
justment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “TREBLE”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗ The factory default setting is “T”. (Ad-
justment range: –6 to +6)
3. Press the [ d] or [a] button to select “T
10>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “T”.(Ad-
justment 10 kHz/15 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select “BAL 0”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is “BAL 0”. (Adjust-
ment range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FAD 0”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
Basic Operations