Cadco XAF-135 User Manual

Page 12

• Screw the glass cover back on.

• Reassemble the side rails.

2.2 REPLACEMENT OF THE FUSE

To replace the fuse:

• Press on the cover of the fuse holder and rotate it of about 20° counterclockwise.

• Remove the cover of the fuse holder.

• Remove the fuse from the cover of the fuse holder.

• Replace the fuse with one with an identical one.

• Reposition the cover of the fuse holder.

• Press the cover and rotate it about 20° clockwise.

2.3 RESET THE SAFETY THERMOSTAT

• This oven is equipped with a manually resettable safety thermostat designed to protect the oven against

overheating. If there is an intervention, it completely deactivates the oven to avoid permanent damage.

• To reset this device, remove the black cap positioned to the bottom of the

back of the oven by unscrewing it counterclockwise, push the reset button
under the cap, and replace the black cap.

• If the safety thermostat shuts your oven off, before turning your oven back on,

be sure to check your entire circuit to verify that the total amps being drawn
by all the appliances, lights, etc. on that circuit do not exceed the amps
available on that circuit.

NOTES

_______________________________________________________________________________________

This manual is related to the following products:

XAF-115