Bdl4652ei_/00, Ac in, Main power switch – Philips Signage Solutions Pantalla E-Line User Manual
Page 2: Ac out, Ir pass through, Rs232c out, Rs232c in, Rj-45, Hdmi in, Displayport
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E-Line Display
46" Edge LED Backlight, Full HD
Input/Output Terminals
BDL4652EI_/00
©AC IN
AC power input from the wall outlet.
© MAIN POWER SWITCH
Switch the main power on/ofF.
© AC OUT
AC power supply to the AC IN jack of a media player.
© IR pass through:
Outputs the remote control IR signal of set-top box to a external
set-top box through 3.5mm jack cable.
© RS232C OUT:
RS232C network output for the loop-through function.
® RS232C IN
RS232C network intput for the loop-through function.
RJ-45
@ LAN control function for the use of remote control signal from
control center.
© HDMI IN
HDMI video/audio input
© DisplayPort
DisplayPort video input
® DVI IN
DVI-D video input
® DVI OUT / VGA OUT
DVI or VGA video output.
@ VGA IN p-Sub)
VGA video input
©VGAAUDIO IN
Audio input for VGA source (3.5mm stereo phone).
@ COMPONENT IN (BNC)
Component YPbPr video source input.
@ Y/CVBS
Video source input.
® SPEAKER SWITCH
Internal speaker on/off switch.
©AUDIO IN
Audio input from external AV device (RCA).
® AUDIO OUT (RCA)
Audio output from the AUDIO IN jack to an external AV device.
© SPEAKERS OUT
External speakers output.
@ OPS SLOT
Slot for installing the optional OPS module.
© KENSINGTON LOCK
Used for security and theft prevention.
© 2013 Koninklijke Philips N.V All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
N.V. or their respective owners.
PCSM025-I34652EN