Combi 7720 - Manual (Page 3)

Opening the Stroller
Front Wheel and Footrest Assembly
1. Before opening,
fully extend the
handle by pushing
handle adjuster
buttons and
rotating the handle
to upright position.
2. Pull the lock lever
out to release the
stroller.
3.
Lift the handle and snap the stroller away from
you. It will open and automatically lock into
position.
1. Lean stroller back and slide the footrest
onto the two front stroller legs (figure A)
until both pins snap in place (figure B). Pull
down on footrest to ensure it is secure.
2. With footrest in place, slide wheels onto
the two front stroller legs until both pins
snap in place (figure C). Pull down on wheel
to ensure it is secure.
Removing the front wheel and footrest:
1. Press in the two pins that secure the front
wheel while sliding the wheel off of the
stroller leg (figure D).
2. Press in the two pins holding the footrest
while sliding the footrest off of the stroller
leg (figure E).
Figure A
Figure B
Figure C Figure D Figure E
- 3 -