Jeep 2011 Wrangler - Manual (Page 259)

11. Remove the lower windshield plates by removing the
six black round-headed Torx
௡ head screws (using a #40
Torx
௡ head driver) on each side of the base of the
windshield.
12. Lower the windshield gently until it contacts the
rubber hood bumpers.
13. Secure the windshield by passing a cinch strap
through the footman hoop on the center of the hood and
on the center of the windshield frame. Tighten the strap
to secure the windshield in place.
Raising The Windshield And Replacing Side Bars
1. Raise the windshield.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257