Jas-Audio ORIOR GRAND - Manual (Page 3)

The tweeter of JAS ORIOR GRAND speaker is
protected with a Transparent-Protective-Sheet to
prevent damaging on the Tweeter Unit (Dispersion
Board + Driver Net)*.
Customers are recommended to remove the
Transparent-Protective-Sheet immediately before
using or installing on your listening system!
ORIOR GRAND Assemble Kit Setup
Each ORIOR GRAND Packing Box contains a set of ORIOR GRAND
Assemble Kit, which carries the feeding parts and accessories. Setup-
Procedure steps in following
1. Four oversized Aluminum-Bar-feeders need to be installed at corners
(Screws and Tools attached in kit). Well, ORIOR GRAND is ready
to lunch after turning up!
2. By turning the level screw (top of the copper-spike), the speaker can
be leveled where it stands. Spike discs use as an option, serve to
protect your flooring from the needle sharp spikes.
Caution: Do not over tighten the level-screws when installing the feet.
Doing so might risk breaking the bar feeder holes, and level-screws become
functionless. A removable warning label has been attached at the base of
each speaker already.
Well prepared before Settling
Page 3 of 8
http://www.jas-audio.com