Jas-Audio ORSA - Manual (Page 3)

Unpacking Inspection
The tweeter of JAS Orsa speaker is protected with a Transparent-Protective-
Sheet to prevent damaging on the Tweeter Unit
(Dispersion Board+Driver Net)*.
Customers are recommended to remove the
Transparent-Protective-Sheet immediately before
using or installing on your listening system!
Well prepared before Settling
Two caution on your speakers’near placing:
I.
Do not place any kinds of metal pieces, such as: keys, needles,
staples... etc. near or closed to the Orsa＇s tweeter units, because the
magnetic field can cause a strong attractive force to damage the
speaker.
II. Do not use vacuum cleaner on the speaker drivers; on the other hand,
do not direct coupling the speaker drivers by strong air via
compression gun. Any extreme blowing may damage the speakers.
* If you feel the speakers sounded very
muffled and distant (abnormal); as if, please
open the speaker grille (net-cover) carefully
and double check
if the tweeter unit was
covered by the Transparent-Protective-Sheet.
Product Features
Cabinet
• Low diffraction front baffle design
• High quality MDF (Medium Density Fiber-board)
• Inner horizontal plane bracing adds extreme rigidity
• Pure natural wool for the best vibration and resonance damping
• Top grade authentic wood veneer with polyester piano finish
• Custom machined, high current binding posts
Page 3 of 7
http://www.jas-audio.com