Intex Pool Volleyball Set for Round Metal Frame Pools 2013 - Manual (Page 3)

(51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 05/07/2012 (51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 05/07/2012
51PO
S AVE THESE INSTRUCTIONS
51PO
S AVE THESE INSTRUCTIONS
Page 6 Page 5
SETUP
INSTRUCTIONS
POOL VOLLEYBALL SET UP (continued)
SETUP
INSTRUCTIONS
POOL VOLLEYBALL SET UP
IMPORTANT: Before proceeding to the next step ensure the pool is
fully set up and filled with water following the pool owner's manual.
1. Fully open the two dovetail screws (3)
and attach a pole bracket (5) to a
circular metal frame pool "T JOINT".
Make sure the pole bracket (5) is
securely attached to the "T JOINT".
2. Secure the pole bracket (5) with two
X-long pins (2) and tighten the two
dovetail screws back using your
fingers only. NOTE: Do not over
tighten or use tool such as pliers.
3. Insert the assembled volleyball pole
into the pole bracket (5). Secure the
pole to the bracket with long pins (1).
2
1
3
2
2
4. Attach two volleyball net fasteners (8)
to the volleyball pole. Ensure the
volleyball net fasteners (8) are facing
outward.
5. Locate the opposite "T JOINT" of the
circular metal frame pool and attach
the second pole bracket (5) to the "T
JOINT", repeat steps #1 to #4.
6. Attach one side of the Volleyball
Net (9) starting from the top
Volleyball Net Fastener (8) and then
the bottom fastener. Loop the rope
around the fastener (8) several
times and secure the end of the
rope to the two notches in the
fastener. NOTE: Adjust the length of
the rope to be looped around the
fasteners depend ing on the size of
the pool. Repeat this procedure
for the other pole.
3
1
2
5
3
1
Frame pool
“T” joint
2
1
5
1
3
6
6
8
4
5
8
2
1
6
8