Crate Amplifiers KXB100 User Manual

Page 5

9. INPUT: Use this 1/4” jack to connect a keyboard or other line level signal to the corresponding
channel by means of a shielded instrument cable.

10. EQUALIZATION: Use this five-band graphic equalizer to shape the output of the amplifier to best
suit your tastes and to compensate for room acoustics.

11. REVERB RETURN: Use this control to adjust the overall amount of reverberation applied to the
output signal. This control works in conjunction with each channel’s Rev/Eff control (#5).

12. LEVEL: Use this control to adjust the overall output level of the amplifier.

13. EFFECTS RETURN: Use this control to adjust the amount of external effect (if used) from the
Patch Bay Send and Return (#17, 18). This control works in conjunction with each channel’s Rev/Eff
control (#5).

14. LINE OUT / HEADPHONES LEVEL: Use this control to adjust the level of the signal at the Bal.
Line Out jack (#21) and the (headphones) jack (#22). This control functions independently from
the Master Level control (#12).

15. ON: This LED illuminates when the amplifier is turned on.

16. (POWER): Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom
of the switch depressed).

17. SEND: Use this jack to send a signal from the amplifier to an external effects device. The signal
at this jack is pre-EQ for reduced noise.

18. RETURN: Use this jack to return a signal to the amplifier from an external effects device. The
amount of effect applied from the Send and Return jacks to the signal is governed by the Effects
Return control (#13).

KXB100 Keyboard Amplifier