Cisco SPA 2100 - Manual (Page 8)

8
You will be redirected to the configuration page in 5 seconds.
If not, you can click HERE to return to the configuration page.
12. Close the browser.
13. Pull out the power supply plug from your NationPhone Router & Phone Adapter. Wait 10 seconds, and then plug the
power supply back into the Adapter.
14. The yellow STAT light will blink for up to one minute. Wait until both the yellow STAT and the Green ( lights are
illuminated and have stopped blinking.
15. Talk on the phone and surf the web! Your NationPhone Router & Phone Adapter is now configured to provide your
PPPoE Login information to access your DSL Internet service.
16. Please return to the NationPhone installations instructions or Figure 2 below if you are utilizing a router, hub or switch to
complete your network setup. As a reminder, the router, hub or switch connects to the PC port of the NationPhone Router
& Phone Adapter. The Adapter is a DHCP server/router and will provide IP addresses for use with a network switch.
Figure 2