Cary Audio Design CAD-805AE - Manual (Page 14)

DIAGRAMS
300B TUBE SOCKET PIN LAYOUT IN CHASSIS
The LARGE pair of 300B tube pins should be installed toward the front of the CAD-805AE
amplifier 300B tube sockets. LOOK CAREFULLY at the tube pins to be sure that you insert them
correctly. It is possible to force the tube pins into the socket the wrong way if you are not
careful! If you install the tube wrong you will probably damage the amplifier and the tube. This
damage will not be covered by the manufacturer’s warranty for a new amplifier. If you have any
doubts about this, have the 300B tube installed by your dealer. If you will look carefully at the
pins and install the large pins to the front of the socket all will be fine! These 300B tube pin
installation instructions are valid for the CAD-805AE only.
Front of the tube socket installed on the CAD-805AE chassis
13