Century PM-1109AB - Manual (Page 4)

1
Hold swivel wheel assembly
upright (Tab pointing down).
2
Tilt stroller slightly back and
push wheel assembly onto leg
until it locks in place.
Repeat steps 1 and 2 for
opposite leg.
CAUTION: After wheel assembly is complete, pull on
wheels to check that they are locked in place.
1
Stand stroller upright and
rotate lever to release latch.
2
Spread handle and rear legs
until both Fold Locks “click”
into position.
ASSEMBLY
3
Opening Stroller
Front Wheel Assembly
Tab
Push footrest down so that
Cross Tube is centered between
three (3) Tabs on bottom of
footrest, and it snaps in place.
Locking Footrest
Tabs
1
Remove axle protectors from ends of axle and discard.
2
With stroller laying face down
on floor, slide brake lever brackets
onto rear legs until you hear a
click.
NOTE: Brake levers must face
rear of stroller.
Rear Wheel Assembly
Fold Locks
Cross Tube