Coleman 9987 Series - Manual (Page 8)

7. Open the door to reveal the Quick Coupler in
the upper corner. Retract the Collar on the
Quick Coupler before attaching to the male
fitting (Fig. 8). Release the collar to lock the
connection.
English-7
Setup
Fig. 8
8. Check that the hose has no kinks or sharp
bends and clears areas that will become hot
during use. Never put strain on the hose where
it joins a fitting.
6. Push the fuel hose connection through the
opening in the side grill panel (Fig. 7).
Fig. 7
Rotisserie
Assembly
1. Slide the grease tray into the rails below the
rotisserie (Fig. 11).
Fig. 11
10. Slide the motor downward over the bracket
and push firmly into position (Fig. 10).
Fig. 10
11. Plug the rotisserie cord into the outlet in the
back of the grill.
9. Push the electrical plug down through the
rotisserie frame (Fig. 9).
Fig. 9
NOTE: To use the rotisserie, the wire oven rack
must be removed and set aside.
2. Assemble the meat forks and the collar onto
the spit rod (Fig. 12). Adjust the location of the
collar with the thumbscrew to support the spit
rod.
Rotisserie Setup
Fig. 12