Vertical Communications and FX Series - Manual (Page 34)

5.2 Using LCD Messaging
NOTE: You can set system-supplied messages to display at any calling
LCD speakerphone.
•
To turn on LCD messaging,
1. Press INTERCOM.
2. Dial ✳ 02.
3. Press # to clear current message if you have one stored.
4. Dial message code number (01–30).
5. Press # and then press SPEAKER to end message.
6. INTERCOM light flashes.
•
To turn off LCD messaging and your INTERCOM light,
1. Press INTERCOM.
2. Dial # 02.
Sending And Receiving Non-Verbal Messages GCA70–198
5 – 2 LCD Station User's Guide