Assistance, Storage – Philips QC5055 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assistance
For assistance, call toll free:
1-800-243-3050
or visit our website:
Information is available 24 hours a day,
7 days a week.
Storage
► Be sure Clipper is turned OFF. Remove cord
from outlet and Clipper before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
I Do not wrap cord around Clipper when
storing.
►
Store cord in a safe location where it will not
be cut or damaged.
I Do not place or store Clipper where
it can fall or be pulled into a tub or sink, water
or other liquid while plugged in.
Battery Removal
I This Philips Norelco Clipper contains
rechargeable Nickel Metal Hydride batteries
which must be disposed of properly (fig. 16).
► Batteries should only be removed when
Clipper is to be discarded.
► For assistance, call toll free: 1-800-243-3050 or
.
D
Unplug electrical cord from outlet and
Clipper before dismantling Clipper.
B Allow Clipper to run until the battery is
empty/depleted.
H Turn Clipper OFF.
Q Remove any comb and clipping attachment
from the handle.
H Use a screwdriver to remove the screw from
the handle (fig. 17).
Q Pull the two panels off the handle (fig. 18).
B Lift the batteries out of the handle (fig. 19).
fil Cut the wires close to the batteries with
household scissors (fig. 20).
□ Do not attempt to replace batteries. Insulate
battery ends by covering with tape and/or
place batteries in a small plastic bag.
EQ
Discard your Clipper. Do not attempt to
plug electrical cord into the outlet or
recharge the Clipper after the batteries have
been removed.
m Contact your local town or city officials
for battery disposal information or call
1-800-8-BATTERY or
battery drop-off locations.