CLIFFORD XL4000 User Manual

Page 25

Table of user-selectable features: 1 chirp = OFF, two chirps = ON.

Feature Select

Column 1

1st latched

Column 2

2nd latched

Column 3

3rd latched

Row 1

1st momentary

Add new remote to channel 1

info on page 11

NOTE 1

AutoLock

on
/off

info on page 16

Enhanced AutoArming:

on
/off

info on page 13

Row 2

2nd momentary

Add new remote to channel 2

info on page 11

NOTE 2

AutoUnLock

on
/off

info on page 16

AutoArm & Lock: on/

off

info on page 13

Row 3

3rd momentary

Add new remote to channel 3

info on page 11

NOTE 3

FACT:

on
/off

info on page 16

✱

Set headlight duration: 1sec - 2.5min (

30sec

)

info on page 12

NOTE 6

Row 4

4th momentary

Add new remote to channel 4

info on page 11

NOTE 4

AutoActivate timed accessory upon remote arming: on/

off

THIS FEATURE IS FOR INSTALLERS ONLY

Siren duration: 60/

seconds

(1/
2 chirps)

info on page 19

Row 5

5th momentary

Erase all channels

info on page 22

NOTE 5

Long-term chirp silencing: on/

off

info on page 19

Set a new secret valet code

info on page 15

NOTE 7

✱

WARNING:

If you have remote window and sunroof closure, DO NOT CHANGE THIS SETTING: it requires insta

ller-only adjustment. Changing the duration may cause damage.

Please Note: There is a column 4 that contains installer-only features; do not change any of the

se settings. If you accidentally select column 4, turn off the ignition.

NOTE 1:

Transmit channel 1 (or other channel of your choosing) of the new

remote control. You will hear one chirp to confirm programming of channel 1.

NOTE 2:

Transmit channel 2 (or other channel of your choosing) of the new

remote control. You will hear two chirps to confirm programming of channel 2.

NOTE 3:

Transmit channel 3 (or other channel of your choosing) of the new

remote control. You will hear three chirps to confirm programming of channel 3.

NOTE 4:

Transmit channel 4 (or other channel of your choosing) of the new

remote control. You will hear four chirps to confirm programming of channel 4.

NOTE 5:

When you hear one chirp, all remotes will have been erased from the

system memory. You must now add the new and/or existing remote controls to

the system (i.e., program channels 1–4 of each remote that will be used with

your Concept 20).

NOTE 6:

The headlight timer starts as soon as you select this feature. When the

duration you wish has been reached, press button 1 on the remote control. You

will hear two chirps to confirm the new headlight timer duration.

NOTE 7:

Immediately flip the switch to its latched position

, then:

a.
Enter the new code that you wish to use. The system will sound the same

number of chirps as the digit you choose when you move the switch to the

latched side (e.g., if the first digit is 4, you’ll hear four chirps when you

press the latched side).

b.
Make sure to return the switch to its center position when complete.

c.
Wait 3 seconds until you hear 2 chirps

, indicating the new code has been

accepted.

d.
Turn the ignition off. You’ll hear 3 chirps to confirm program mode exit

and the LED will turn off.

e.
VERY IMPORTANT:

You must immediately test your new secret

disarming/valet code

: Turn the ignition on, enter your new code, then flip

the switch to its latched position. The LED will illuminate. If it does not,

the new code you programmed and the one you just entered do not match.

The system has reverted to the previous code.