Philips AZ 7465 - Manual (Page 8)

CONNECTIONS
Recharging of Philips battery pack on board
The battery pack will be recharged if the mains adapter is connected, the set is
switched off and you press the STOP ■ button.
-► Display indication during charging; rw,
Approx, charging time; 5.5 hours.
Display indication if fully charged; FIJL L and *=•
Notes:
- When using rechargeable batteries, we advise the use of the Philips battery pack
only, as conventional separate Nickel-Cadmium batteries cannot be recharged on
board.
- To ensure a long life for your battery pack, charging will automatically be
interrupted at high ambient temperatures (Display indication: h'Ot ].
Connecting headphones
(supplied)
Connect the supplied headphones (16 ohms/
3.5mm jack plug) with the CD OUT/REMOTE 0 jack.
Note: Use this jack also for connecting your HiPi system
(signal lead! or your car radio (adapter cassette or
signal lead). In both cases, the volume of the CD
player has to be set to maximum position (10).
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can pemnanently damage hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a
hazard and it is illegal in many countries. Even if your headphones are an open-air
type designed to let you hear outside sounds, do not turn up the volume so high
that you cannot hear what is going on around you.