Philips AZ 7474/00S - Manual (Page 16)

OPERATION
ESA - Electronic Shock Absorption Memory
Activate the ESA memoty by sliding the
ESA switch to the right.
-► The ESA symbol iights up in the display.
The ESA memory continuously stores in advance the
CD data to be played. This is to prevent sound skipping
during play due to shock and vibration.
-► Prolonged shocks and vibrations may empty the ESA
memory completely. Then the display shows SGTr5'
and there will be no sound.
Note: When switching the ESA feature on and off, CD play wiil be deiayed or
interrupted for a short time.
RESUME/HOLD
RESUME - playing from where you have stopped
Activate the RESUME feature by sliding the RESUME/HOLD
switch to the middle.
If you stop CD play by pressing the STOP ■ button, the last
played position will be stored.
Press HI to resume CD play from the position where it
was stopped.
HOLD - deactivating all buttons
Activate the HOLD feature by sliding the RESUME/HOLD switch to the far right.
-► Now ail buttons are deactivated and will not function until you switch the
feature off again. If you press a button (except OPEN), the display will indicate
HOLD.
Notes:
-in the hold position, the resume function is automatically activated.
•Donat open the lid as this erases the information about the last position played.
16