Connections, Recharging of philips battery pack on board, Connecting headphones (supplied) – Philips AZ 7365 User Manual
Page 8: Connecting headphones
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
Recharging of Philips battery pack on board
The battery pack will be recharged if the mains adapter is connected, the set is
switched off and you press the STOP ■ button.
-► Display indication during charging; r.V/?/'u£ and
Approx, charging time: 5.5 hours.
-► Display indication if fully charged: FUi i and
Notes:
- When using rechargeable batteries, we advise the use of the Philips battery pack
only, as conventional separate Nickel-Cadmium batteries cannot be recharged on
board.
- To ensure a long life for your battery pack, charging will automatically be
interrupted at high ambient temperatures ¡Display indication: Wûè j.
Connecting headphones
(supplied)
Connect the supplied headphones (16 ohms/
3.5mm jack plug) with the CD OUT/REMDTE fi jack.
Note: Use this jack also for connecting your HiPi system
(signal lead) or your car radio (adapter cassette or
signal lead). In both cases, the volume of the CO
player has to be set to maximum position (10).
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Heating experts
advise that continuous use at high volume can permanently damage hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a
hazard and it is illegal in many countries. Even if your headphones are an open-air
type designed to let you hear outside sounds, do not turn up the volume so high
that you cannot hear what is going on around you.