Philips CDC 550 - Manual (Page 6)

to the beginning of the next track. The corresponding
track number appears in the display ©.
• Pressing the PLAY/PAUSE button ©cancels the
INTROSCAN function. The CD plays normally from
the current track onwards.
• If you press the SEARCH NEXT button © or the
PREV SEARCH button © the unit remains in the
INTROSCAN function and the first fewseconds of the
next track or the previous track respectively are
played.
• If the INTROSCAN function is not cancelled by
pressing the PLAY/PAUSE button @ or the STOP
button ©. the CD player automatically reverts to the
STOP position at the end of the last CD.
Shuffle play
• Press SHUFFLE © before or during play. The
SHUFFLE indication lights up and a 'shuffle logo’
appears in the display.
- All tracks will now be played in a random order.
During play you can use SEARCH NEXT© to select
a following random track, or PREV SEARCH © to
play the same track again.
• Press SHUFFLE again if you wish to return to
normal play.
Interrupting play
• Press PLAY/PAUSE®
- PAUSE appears in the display.
• Press PLAY/PAUSE again to end pause.
- Play will be resumed where it was stopped.
Stopping play
• Press STOP © if you wish to stop. The disc and
track number which can be played will now appear
in the display.
• Press OPEN/CLOSE © to remove the CDs.
you wish to store tracks using the DISC SELECT
buttons ©.
• Press SEARCH NEXT © (or PREV SEARCH ®)
until the required track number appears in the
display.
• Store the required number using PROGRAM ©.
- Each time you store a track, a P will appear and the
display will blink another 5 seconds.
• Repeat this procedure for the other tracks to be
programmed.
• If you program track numbers which do not exist,
these will be ignored during play and erased from the
memory.
• During normal playback (PLAY or SHUFFLE), you
can program the number of the current track into the
memory by pressing the PROGRAM button ©twice.
Reviewing the program
• Press REVIEW ©.
- All track numbers and CD numbers appear in the
programmed order in the display.
Erasing the program.
• If you wish to erase the program, press CLEAR
PROGRAM ©
• The program of a particular CD will be erased if you
press CLEAR PROGRAM © and the relevant DISC
SELECT button © immediately thereafter.
Playing the program
• Beginning from the STOP mode, press PLAY/
PAUSE ©
- Play begins with the first item in the program.
PROGRAMMING
By programming the player, you can play up to
50 tracks in any desired order. If you exceed the
maximum of 50 tracks, F will appear in the display.
• Press PROGRAM ®.
- PROGFiAM appears blinking for 5 seconds in the
display together with the disc number. A further
selection must be done within the 5 seconds
blinking period, otherwise you have to press
PROGRAM © again.
• Select the disc number - if necessary - from which