Philips AK 691 - Manual (Page 5)

on the display ©, playback is interrupted and the
next track is played.
If you wish to skip several tracks, press the
'NEXT/SEARCH' key @ several times until the
desired track number appears on the display ©.
2. Press briefly (less than 0.5 second) during
SHUFFLE
- to go to the next random track.
If you wish to skip the current track, you can jump
to the next random track by pressing the ’NEXT/
SEARCH' key @ once. The next random track
number then appears on the display ©, playback is
interrupted and the next random track is played.
3. Hold down (more than 0.5 second) for rapid
search during PLAY
By this means you can search forwards through a
disc. The sound is speeded up and only partially
reproduced, but remains recognisable. In this way,
you can rapidly locate a certain passage in a track.
Hold down the ’NEXT/SEARCH’ key ® until you
recognise the desired passage. When you release
the key, the disc plays normally from this passage
onwards.
NEXT/SEARCH - PREVIOUS/SEARCH
Press briefly (less than 0.5 second) in the STOP
position with a disc in the drawer.
a. When the unit is in the STOP position, you can
start playback at a certain track by pressing the
’NEXT/SEARCH’ key @ or ’PREVIOUS/
SEARCH’ key ©until the desired track number
appears on the display ©
Press the ’PLAY/PAUSE’ key ® to begin
playback with the track you have selected.
b. With the unit in the STOP position, you can
program a number of tracks by selecting the
desired track numbers with the ’NEXT/
SEARCH’ key © or the ’PREVIOUS/SEARCH’
key © See also ’Manual programming’ in this
section.
REPEAT
If you wish to continuously repeat the whole disc,
the programmed selection, the shuffle or the
introscan function, press the ’REPEAT’ button ®.
The ’Repeat indicator’ ©then lights up. if you wish
to cancel the Repeat function, press the ’REPEAT’
button ©again. The ’Repeat indicator'©goes out.
PREVIOUS/SEARCH
1. Press briefly (less than 0.5 second) during
PLAY and INTROSCAN
- to go to the previous track.
If you wish to listen to the current track again from
the beginning, press the ‘PREVIOUS/SEARCH’ key
© once: playback is interrupted and the track is
repeated from the beginning. If you wish to repeat
one of the previous tracks, press the ’PREVIOUS/
SEARCH’ key © several times until the desired
track number appears on the display ©.
2. Hold down (more than 0.5 second) for rapid
search during PLAY
By this means you can search backwards through
a disc. The sound is speeded up and only partially
reproduced, but remains recognisable. In this way,
you can rapidly locate a certain passage in a track.
Hold down the ’PREVIOUS/SEARCH’ key © until
you recognise the desired passage. When you
release the key, the disc plays normally from this
passage onwards.
INTROSCAN
The INTROSCAN function can be engaged in both
STOP and PLAY modes by pressing the ’INTRO­
SCAN’ button ©. The ’Introscan indicator’ ©then
lights up.
The INTROSCAN function causes the first few
seconds of every track to be played, beginning at
track number 1. After playing the opening seconds
of a track the CD player jumps to the beginning of
the next track. The corresponding track number
always appears on the display ®.
• Pressing the ’PLAY/PAUSE’ key ©cancels the
INTROSCAN function. The Introscan indicator ©
goes out and the disc plays normally from the
current track onwards.
• If you press the ’NEXT/SEARCH’ key © or the
’PREVIOUS/SEARCH’ key © the unit remains in
the INTROSCAN function and the first few seconds
of the next track or the previous track respectively
are played.
• If the INTROSCAN function is not cancelled by
pressing the ’PLAY/PAUSE’ key © or the ’STOP’
key © the CD player automatically reverts to the
STOP position at the end of the disc.