Philips SHB7100/7102/7103 - Manual (Page 11)

•)Put your headset into pairing mode.
Make sure the headset is off. Press the multi-function button until your
headsets LED will flash red and blue alternately indicating that it has entered
pairing mode. The headset will remain in pairing mode for three minutes.
2.)Search and discover your headset from the phone that you want to
pair the headset with.
• After completing pairing step I access a menu on your mobile phone typically
called “Setup”, “Settings”, “Bluetooth” or “Connectivity”. Select the option
to discover or search for Bluetooth devices. After several seconds search
time your phone should indicate that it has found the “Philips SHB7I00”. For
further instructions on using Bluetooth on your mobile phone please refer to
your mobile phones user manual.
• Upon selecting the headset on your mobile phone typically you will need to
confirm the pairing and enter a passkey or PIN. Please enter the headsets
PIN “0000" (4 zeros). If your phone asks whether you want to change the
headsets name, you may confirm the “Philips SHB7I00” name or change it.
• The headset LED will flash blue, indicating successful pairing. You are now
ready to talk and listen to music from your phone.
y.iil i
10:35
Setting Connectivity
Bluetooth
Search for new devices
Paired devices
Select Back
y.iil '
Setting
Devices Found
Philips SHB7100
Select Back
T. l l H i 10:37
Setting Connectivity
Enter Passwords
****
0000
Select lack
After the initial pairing you do not need to repeat this process. The headset will
connect automatically to the paired Bluetooth enabled device after turning it
on. Only if you pair the headset with another device you will have to repeat the
pairing.