Philips CDD3615 - Manual (Page 10)

SPECIFICATIONS
Slim line cabinet with compact design.
25W switching power supply built-in.
Plug’N Play, easy to install.
Parallel port to IDE contoller built-in.
Connects to any desktop or notebook PC through printer port.
Supports Windows 95, Windows NT.
Supports EPP/ECP mode for printer port.
Provides additional parallel port for simultaneous printer use.
With audio line out connectors.
AC Voltage input characteristics
AC Input Voltage (nominal) 100 - 240 VAC
AC Input Frequency
AC Input Current
Fuse rating
50 - 60 Hz
1.1 A Max. at 115 VAC Input (max.load)
0.6 A Max. at 230 VAG input (max.load)
2 A / 250 VAC on board
(accessible for service personnel only)
Protection
The power supply in the unit is protected against:
- over-power situations, recovery after power situation is
corrected.
- over-voltage situations, by an internal fuse.
- short circuit, recovery after short is corrected on the primary
side.
On the secondary side, i.e. the +5 VDC and +12 VDC used for the
internal drive, the power supply will simply shutdown in case of a
short circuit; until the error condition causing it is relieved.
Over-voltage will blow a Zener diode. Both the fuse and the Zener
are accesable for authorised personal only.
Mechanical characteristics
Weight (including int. drive) 2 kg (approx.)
Dimensions (W x D x H) 165 x 300 x 55 mm
Safety and EMC
Complies with EN60950, EN55022, Class B, EN50082-1