Hyundai H-CT28 - Manual (Page 3)

3
Flush mount tweeter installation (picture 2)
Locate a suitable position for the tweeter. Many positions will provide good sound quality. For optimum staging, position tweeter higher than woofer but
within 5 to 10" of the woofer.
Use the cut out template and mark and cut out the hole for the tweeter to sit into. Place the entire tweeter pod into the hole.
From the rear of the tweeter. Slide the grooved locking device over the tweeter cable and then over the back of the tweeter case to firmly hold it in place.
The tweeter direction should then be adjusted so that the tweeter is focused towards the listener.
NOTE: Turn your system back on and confirm the speakers operation first at a low volume and then you may increase the volume as you desire.
Crossover installation
Connect the two wires from the crossovers to the tweeter.
Connect the wires from the source to the input wires of the crossover. Make sure the source unit is turned off before making this connection to avoid
damaging any equipment.
Secure the crossovers in a safe place to keep them moisture free and away from any other possible hazards.
Pic. 1 Pic. 2