Philips AE 2340/00 - Manual (Page 10)

Clock Alarm Sleep
SETTING THE TIME SLEEP FUNCTION
The time can be set either with the power on
or off.
• Press SET TIME®.
- The time on the display starts flashing.
• Now you can set the time using •■>. or v
ALARM FUNCTION
You can use your radio as an alarm clock. To
use this function you first have to set the alarm
time.
You can choose to be woken up by buzzer or
by radio.
The alarm time can be set either with the
power on or off.
Setting the alarm time
• Press SET ALARM®.
- The alarm time will appear and the alarm
indication will start flashing on the display:
1 -n n l-u u
• Now you can set the alarm time using or
•v ®.
Switching the alarm on
• Set ALARM® to:
- RADIO if you wish to be woken by the radio;
- BUZZ if you wish to be woken by the buzzer.
- At the set alarm time you will be woken by the
radio or the buzzer.
- The buzzer will become louder after 10
seconds.
Switching the alarm off completely
• Set ALARM ® to OFF.
Switching the aiarm off for 24 hours
• Press any button on the set to switch the alarm
off.
- The alarm switches itself off automatically after
one hour.
Your radio is equipped with a sleep function. It
enables you to continue listening to the radio
while you fall asleep After 90, 60. 30 or 10
minutes the radio will be switched off
automatically.
Switching the sleep function on
• Press SLEEP ®.
• The radio will come on and the SLEEP
indication and the length of time before the
radio will switch off will appear on the display.
• Now select the desired length of time within 5
seconds by pressing SLEEP ® briefly.
Each time you press SLEEP the length of time
will change step by step; 90,60,30 or 10
minutes.
• The frequency and the SLEEP indication will
then appear on the display.
Switching the sieep function off
The sleep function can be switched off before
the set time has elapsed:
• Press SLEEP® or POWER®.
The SLEEP indication will disappear from the
display and the radio will switch off.