Connections, Connecting the headphones (supplied) – Philips Magnavox AZ7383/01 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
Recharging the Philips Magnavox battery pack on board
(supplied or optionally available)
AY 3361 NiCd battery pack for recharging on board.
The battery pack will be recharged if the power adapter is connected, the set is
switched off, and the STOP ■ button is pressed.
-► Display indication during charging: £■«/?/■&£ and s.
Approx, charging time: 5 hours (NiCd)
-► Display indication when fully charged: FUL t and s:.
Note: - Use only the Philips Magnavox battery pack, as other rechargeabie batteries
cannot be recharged on board.
Connecting the headphones
(supplied)
Connect the supplied headphones to the
rj LINE OUT jack.
Note: Use this jack aiso for connecting your HiPi system
(signal lead) or your car radio (adapter cassette or
signal lead). In both cases, the volume of the CD
player has to be set to position 8.
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a
hazard and it is illegal in many countries. Even if your headphones are an open-air
type designed to let you hear outside sounds, do not turn up the volume so high
that you cannot hear what is going on around you.
10