ISP Technologies VMAX 150C - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS!
Please read this very carefully before operating this unit

Read ALL instructions carefully before using this unit.

Do not operate this unit near water, in the rain or where there is moisture. If
this warning is ignored a serious electrical shock or death may occur.

Do not attempt to service this unit. No user serviceable parts inside. Refer
servicing to qualified, ISP approved service personnel.

Never remove or defeat the ground connection on the power cord of this
unit.

Care should be taken to avoid spilling any foreign objects or liquid into this
unit.

This active speaker system has two internal power amplifiers and an external
heatsink located on the side of the speaker for cooling of the internal
amplifiers. Care should be taken to avoid placing this active speaker in a
location where the external heatsink does not allow proper cooling of the
internal amplifiers. Avoid placing this system close to other heat sources.
The external heatsink may reach extremely high temperatures under
continuous use. Do not block the external heatsink with any other object.
Make certain there is proper ventilation for the external heatsink when is use.
If using the VMAX at continuous high level and the unit reaches thermal
attenuation it is recommended to position a cooling fan so as to circulate air
across the heatsink.

Do not drive the VMAX into excessive heavy distortion for an extended
period of time to avoid premature speaker failure.

Failure to follow these instructions may void the warranty.