ISP Technologies DECIMATOR PRO RACK G - Manual (Page 4)

REAR PANEL
1. CHANNEL 1 INPUT JACK
This ¼ inch mono jack provides the high impedance input for connection to your guitar.
2. CHANNEL 1 OUTPUT JACK
This ¼ inch mono jack provides the unbalanced output signal for channel 1.
3. CHANNEL 2 INPUT JACK
This ¼ inch mono jack provides a balanced input for the audio path channel 2.
4. CHANNEL 2 OUTPUT JACK
This ¼ inch mono jack provides the unbalanced output signal for channel 2.
5. GROUND LIFT SWITCHES*
All switches eliminate the ground connection for the illustrated channel input or output.
6. POWER INPUT JACK
This jack connector accepts power from the 9V AC adaptor supplied with the unit.
DECIMATOR PRORACK G OPERATION
*NOTE: Ground Lift switches allow the user to lift the ground between the
output signal of channel one of the ProRack G and the input of the selected
amplifier, and between each of channel two’s input and output signals that
connect to an amplifiers effects loop. If a ground loop hum occurs it is
recommended to disconnect or ground lift all but one connection. You may want
to experiment with the best grounding option for the lowest noise performance.