Impression pedal specifications, Warranty and service – ISP Technologies IMPRESSION User Manual
Page 5
IMPRESSION PEDAL SPECIFICATIONS
Input Impedance
Maximum Input Level
Maximum Output Level
Dynamic Range
Decimator Effective Noise Reduction
Noise Floor / Mix Level at ½
CHORUS Modulation Time
FLANGE Modulation Time
Maximum DELAY Time
Reverb Mix
Dimensions
Weight
Power
Power Consumption
560k ohms
+11dbu
+11dbu
93db A weighted
12db
-90dbu
User Set up to 5 seconds
User Set up to 5 seconds
800 milliseconds
User Set from Odb to -21db
7.4”L x 4.7”W x 1.42”H
1.06 lbs
9VAC External Adaptor
200 milliamps at 9VAC
WARRANTY AND SERVICE
The Internal Circuitry is fully guaranteed to be free of defects under normal use and service for a
period of three years from the date of purchase.
Any damage resulting from the misuse or the failure to follow the precautions and instructions will
void the warranty.
In the event that the unit needs to be repaired, please return the unit to ISP Technologies directly.
Repack the unit, send a copy of the original receipt, a note stating the problem, your contact
information and send it to:
ISP Technologies, LLC
5479 Perry Drive Unit B
Waterford, MI 48329
Attn: Repair Dept.
All shipping charges must be fully prepaid.
ISP® will not be responsible for any damages incurred in shipping of any unit. Any claim will need
to be settled with the shipping company.
The warranty will be voided if the serial number has been tampered with in any way. The warranty
card must also be filled out and returned in order to activate the warranty.
Should you have any questions for the repair department prior to returning the product please call
248-673-7790
ISP TECHNOLOGIES, LLC
5479 PERRY DRIVE UNIT B
WATERFORD, MI. 48329
Phone: 248-673-7790
IMPRESSION IS A TRADEMARK OF ISP Technologies LLC. ISP and Decimator are registered trademarks of
ISP Technologies LLC