ISP Technologies BASS VECTOR PRO - Manual (Page 5)

SPEAKON CONNECTOR
This speakon connector can be found on the back panel of the
Bass Vector Passive cabinets. Connect to the corresponding
Neutrik speakon connector of the Bass Vector Active cabinets.
FUSE REPLACEMENT
1. Use a small screwdriver as shown to slide the fuse
cover out from the power inlet module. The fuse can
be found inside the fuse cover module after it is
pulled out.
NOTE: A SMALL COMPARTMENT IS ALSO
PROVIDED WITHIN THE FUSE COVER
MODULE FOR STORING A SPARE FUSE.
2. After replacing the fuse with another of identical
specifications, push the fuse cover module fully back
into place, ensuring that the fuse has snapped onto
the fuse holder inside the power inlet module.