I.C.E. MTI 11-300 - Manual

Industrial 51 Aikins Street
Commercial Winnipeg, MB
Equipment Canada, R2W 4E3
Manufacturing LTD.
MTI
INSTALLATION, OPERATION AND MAINTAINANCE MANUAL
ATEENTION: Read this manual, unit submittal sheets and all labels attached to the unit care fully before
attempting to install, operate or service these units! Check unit data plates for type of gas, model number and serial
numbers. Retain this document for future reference.
FOR YOU SAFTEY IF YOU
SMELL GAS FOLLOW THESE
INSTRUCTIONS,
1) OPEN WINDOWS
2) DO NOT TOUCH
ELECTRICAL
SWITCHES
3) EXTINGUISH ANY OPEN
FLAMES
4) CALL THE GAS
SUPPLIER
IMMEDIATLY
FOR YOUR SAFETY THE USE
OF GASOLINE OR OTHER
FLAMMABLE VAPORS AND
LIQUIDS IN OPEN
CONTAINERS IN THE
VICINITY OF THIS
APPLIANCE IS HAZARDOUS
Model:______________________ Serial Number:___________________
Job:________________________
Date of Installation:____________
WARNING
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR
MAINTAINACE CAN CAUSE PROPERTY DAMAGE OR DEATH. PLEASE READ THIS
INSTALLATION, OPERATION AND MAINTAINANCE MANUAL THOUROUGHLY
BEFORE INSTALLING OR SERVICING THIS EQUIPMENT
INSTALLERS RESPONSIBILITY
Installer please note: This equipment has been test fired and inspected. It has been shipped free from defects from our
factory. However, during shipment and installation, problems such as loose wires, leaks or loose fasteners may occur.
It is the installer’s responsibility to inspect and correct any problems that may be found.
INSTALLER/SERVICE CONTRACTOR
NAME:____________________________
ADDRESS:_________________________
TELEPHONE:_______________________
CONTACT:_________________________