beautypg.com

Lights – HONDA 2000 Insight - Owner's Manual User Manual

Page 193

background image

Lights

Replacing a Headlight Bulb

Your car has halogen headlight

bulbs, one on each side. When

replacing a bulb, handle it by its steel

base and protect the glass from

contact with your skin or hard

objects. If you touch the glass, clean

it with denatured alcohol and a clean

cloth.

Halogen headlight bulbs get very hot

when lit. Oil, perspiration, or a scratch

on the glass can cause the bulb to

overheat and shatter.

HOLDER

1. Open the hood.

If you need to change the head-

light bulb on the driver's side,

remove the engine coolant

reservoir tank by pulling it out of

its holder.

WEATHER SEAL

CONNECTOR

HOLD-DOWN WIRE

2. Remove the electrical connector

from the bulb by squeezing the

connector on both sides to unlock

the tab. Pull the connector straight

off.

3. Remove the rubber weather seal

by pulling on the tab.

Maintenance

BULB

NOTICE

Main Menu

Table of Contents