beautypg.com

Lights – HONDA 2000 Accord Coupe - Owner's Manual User Manual

Page 260

background image

Lights

Replacing Front Turn Signal and

Side Marker Light Bulbs

1. If you are changing the bulb on

the driver's side, start the engine,

turn the steering wheel all the way

to the right, and turn off the

engine. If you are changing the

bulb on the passenger's side, turn

the steering wheel to the left.

2. Use a flat-tipped screwdriver to

remove the holding clip from the

inner fender.

3. Pull the inner fender away from

the fender and bumper.

4. Remove the socket from the

headlight assembly by turning it

one-quarter turn counterclockwise.

5. Remove the burned out bulb from

the socket by pushing it in and

turning counterclockwise until it

unlocks.

6. Install the new bulb in the socket.

Turn it clockwise to lock it in place.

7. Insert the socket back into the

headlight assembly. Turn it

clockwise to lock it in place.

8. Test the lights to make sure the

new bulb is working.

9. Put the inner fender in place.

Install the holding clip. Lock it in

place by pushing on the center.

Maintenance

HOLDING CLIP

Main Menu

Table of Contents