HONDA 2005 Civic Hybrid - Owner's Manual - Manual (Page 97)

If you are
traveling far from home and can no
longer receive your preset stations,
you can use the Auto Select feature
to find stations in the local area.
Press the A. SEL button. ‘‘A.SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM, and twelve FM stations in
the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if Auto
Select cannot find a strong station
for every preset button.
If you do not like the stations Auto
Select has stored, you can store
other frequencies on the preset
buttons as previously described.
press the
A. SEL button. This restores the
presets you originally set.
Adjust the Balance, or side-
to-side strength of the sound.
The displayed number shows you
the current setting. When the level
reaches the center, you will see ‘‘C’’
in the display.
Adjust the Fader, or the
front-to-back strength of the sound.
Adjust the Treble in the
sound.
Adjust the Bass in the sound.
Press the SOUND (TUNE) knob
repeatedly to display Bass (BAS),
Treble (TRE), Fader (FAD), and
Balance (BAL) settings.
Turn the knob to adjust the setting.
The system will automatically return
to the audio display in about 5
seconds.
You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page
). The audio system
illuminates when the parking lights
are on, even if the radio is off.
67
To turn off Auto Select,
AUTO SELECT Adjusting the Sound
BAL
FAD
TRE
BAS
Audio System Lighting
Playing the Radio
Fe
a
tu
re
s
95
Main Menu Table of Contents