Gauges – HONDA 2005 Accord Hybrid - Owner's Manual User Manual

Page 66

This meter shows the number of
miles (U.S.) or kilometers (Canada)
driven since you last reset it.

There are two trip meters: Trip A
and Trip B. Switch between these
displays and the odometer/outside
temperature display by pressing the
Select/Reset knob repeatedly. Each
trip meter works independently, so
you can keep track of two different
distances.

If the outside temperature is
incorrectly displayed, you can adjust
it up to

5°F (

3°C) warmer or

cooler.

NOTE: The temperature must be
stabilized before doing this
procedure.

Select the outside temperature
display, then press the Select/Reset
knob for 10 seconds. The following
sequences appear, 1 second at a
time: 0, 1, 2, 3, 4, 5,

1, 0, 1 (0, 1, 2, 3,

1, 0, 1).

When the temperature reaches the
desired value, release the Select/
Reset knob. You should see the new
outside temperature displayed.

In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.

When you turn the ignition switch to
ON (II), what you last selected is
displayed.

To reset a trip meter, display it and
then press and hold the Select/Reset
knob until the number resets to ‘‘0.0.’’
Both trip meters will reset if the
vehicle’s battery goes dead or is
disconnected.

Trip Meter

Gauges

Inst

nt
s

Cont

Main Menu

Table of Contents