HONDA 2006 S2000 - Owner's Manual - Manual (Page 90)

If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. ‘‘A.SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
, press the
A. SEL button. This restores the
presets you originally set.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
Adjusts the treble in the
sound.
Adjusts the bass in the
sound.
Press the SOUND (TUNE) knob
repeatedly to display the bass (BAS),
treble (TRE), balance (BAL), and
fader (FAD) setting.
Turn the knob to adjust the setting.
When the level reaches the center,
you will see a ‘‘C’’ in the display. The
system will return to the audio
display in about 5 seconds.
You can use the instrument panel
brightness control buttons to adjust
the illumination of the audio system
(see page
). The audio system
illuminates when the parking lights
are on, even if the radio is off.
Adjusts the balance, or side-
to-side strength of the sound.
Adjusts the fader, or the
front-to-back strength of the sound.
58
To turn off auto select AUTO SELECT
Adjusting the Sound
TRE
BAS
Audio System Lighting
BAL
FAD
Playing the AM/FM Radio
88
Main Menu Table of Contents