Transmission fluid – HONDA 2007 Fit - Owner's Manual User Manual
Page 185
Check the fluid level with the engine
at normal operating temperature.
Park the vehicle on level ground.
Shut off the engine.
Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.
Insert the dipstick all the way into
the transmission securely as
shown in the illustration.
If the level is below the lower
mark, add fluid into the filler hole
to bring it to the upper mark.
Pour the fluid slowly and carefully so
you do not spill any. Clean up any
spill immediately; it could damage
components in the engine
compartment.
Remove the dipstick, and check
the fluid level. It should be
between the upper and lower
marks.
Always use Honda ATF-Z1
(automatic transmission fluid). If it’s
not available, you may use a
DEXRON III automatic
transmission fluid as a temporary
replacement. However, continued
use can affect the shift quality. Have
the transmission flushed and refilled
with Honda ATF-Z1 by your dealer
as soon as it is convenient.
1.
2.
3.
5.
4.
CONTINUED
Transmission Fluid
Automatic Transmission Fluid
Ma
int
e
na
nce
183
DIPSTICK
UPPER
MARK
LOWER
MARK
Main Menu
Table of Contents