HONDA 2007 Accord Sedan - Owner's Manual - Manual (Page 120)

Without navigation system
With navigation system
With navigation system
The system will automatically return
the display to the selected audio
mode about five seconds after you
stop adjusting a mode. On vehicles
with navigation system, touch the
RETURN icon to go back to the
audio screen.
Press the SOUND button or icon, or
press the TUNE knob repeatedly to
display the Bass (BAS), Treble
(TRE), Balance (BAL), and Fader
(FAD) settings. On vehicles with
navigation system, touch the
SOUND icon or press the TUNE
knob.
These two
modes adjust the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
Use the TRE/BAS
modes to adjust the tone to your
liking.
If you want to adjust the sound while
the radio/CD is playing, push the
AUDIO DISPLAY button, then touch
the SOUND icon in the display.
Touch the arrows next to the BAS or
TRE icons. The adjustment shows
you the current setting.
Touch the left or right bars on the
sound grid. Balance is equalized
when the vertical lines are centered
on the grid.
Touch the front or rear bars on the
sound grid. The fader is equalized
when the horizontal lines are
centered on the grid.
Each mode is shown in the display as
it changes. Turn the PWR/VOL
knob to adjust the setting to your
liking. When the level reaches the
center, you will see a ‘‘
’’ in the
display.
Adjusting the Sound
Balance/Fader
Treble/Bass
Playing the AM/FM Radio
Fe
a
tu
re
s
119
Main Menu Table of Contents s t Main Menu ▲ ▼ Table of Contents