Multi-view rear camera, Homelink, Training a button – HONDA 2011 Odyssey (EX-L Navi) - Technology Reference Guide User Manual
Page 6: Adjusting the view, Turning the guide lines on or off switching views, How it works
9
MULTI-VIEW REAR CAMERA
8
HOMELINK
®
The HomeLink Universal Transceiver can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home
security systems.
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YES
NO
YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
Adjusting the View
Press and hold CANCEL for
about 3 seconds.
Turning the Guide Lines
On or Off
Switching Views
There are 3 rearview modes: wide,
normal, and top down.
• Press ENTER to toggle between views.
•Turn the Interface Dial to adjust the
screen brightness.
Normal
Normal
Top down
Top down
Wide
Wide
How It Works
• When you shift into Reverse (R), a real-time image
of the area behind your vehicle is shown in the
navigation display.
•Yellow parking guide lines also appear to help you
judge distance.
• The rearview display turns off when you shift out of
Reverse.
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
11 Odyssey TRG_EXL NAVI:ATG_NEW STYLE
7/30/2010
8:23 AM
Page 6