Homelink, If equipped), Hfl phonebook – HONDA 2012 Accord Sedan - Technology Reference Guide User Manual
Page 12: Cellular phonebook * (models with navigation), Training a button
20
21
Press and release the HFL Talk button before you give a command.
HFL Phonebook
1. Say “Phonebook.”
Store up to 50 names and their phone numbers, which can be used
as speed dials.
2. Say “Store.”
3. Say the name of the contact,
and then the phone number.
4. To call a contact once an entry
is stored, say “Call Mike.”
Press and release the Navi Talk button before you give a command.
Cellular Phonebook
*
(models with navigation)
1. Say “Display Information.”
Say “Cellular Phone.”
Import your entire cell phone’s address book to the navigation system.
*
not available on all phones
2. Say “Import Cellular Phonebook.”
3. HFL begins to import your
contacts to the system.
4. To call a contact, say “Search
Imported Phonebook” and select
the name and number.
HOMELINK
®
(if equipped)
The HomeLink Universal Transceiver can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home
security systems.
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YES
NO
YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
12 Accord 4D TRG:ATG_NEW STYLE
7/19/2011
3:32 PM
Page 12