beautypg.com

One-touch turn signal, If equipped – HONDA 2013 Crosstour (EX/EX-L) - Technology Reference Guide User Manual

Page 8

background image

12

13

How It Works

ONE-TOUCH TURN SIGNAL

Use this quick and convenient method to signal a lane change.

• Lightly push the turn signal

lever up or down for a three-

blink sequence.

• For a continuous signal, push

the lever up or down until it

locks into place.

How It Works

DRIVING POSITION MEMORY SYSTEM (DPMS) (

if equipped

)

Store driver’s seat and outside mirror positions into memory for each corresponding

keyless remote (1 or 2), which are recalled when you unlock the driver’s door with

the remote and enter the vehicle.

1. Turn on the vehicle. Make sure

the shift lever is in Park (P).

3. Press SET. You will hear a beep.

2. Adjust your preferred seat and

outside mirror settings.

4. Press the memory button

corresponding to the remote (1

or 2) you are using. You will

hear two beeps.

Note: Stored positions can also be recalled by pressing one of the

memory buttons (1 or 2) on the door.

13 Crosstour TRG_EX EXL_ATG_NEW STYLE 9/18/2012 5:23 PM Page 8