HONDA 2014 Crosstour - Owner's Manual User Manual
Page 87
uu
Gauges and Displays
u
Information Display
86
In
strum
e
nt Pa
nel
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
1. Turn the ignition switch to ON
(
w
*1
.
2. Press and hold the
(Select/Reset) knob for 10 seconds or more while the
outside temperature is shown on the information display.
u
The information display goes into temperature adjustment mode. The display
starts showing from -5°F to +5°F (U.S.) or -3°C to +3°C (Canada).
3. Release the
knob when the right adjustment amount is shown.
u
The adjustment is complete.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Outside Temperature
*
1
The temperature sensor is in the front bumper. Road
heat and exhaust from another vehicle can affect the
temperature reading when your vehicle speed is less
than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the audio/information screen’s customized
features to correct the temperature.
Models with audio touch screen
* Not available on all models
14 CROSSTOUR-31TP66400.book 86 ページ ２０１３年１０月４日 金曜日 午後２時３２分