HONDA 1984 Accord Coupe (EX-L with Navigation) - Technology Reference Guide - Manual (Page 8)

12 13
DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver’s seat positions into memory for each corresponding keyless remote
transmitter (1 or 2).
How It Works
1. Turn on the vehicle. Make sure the
shift lever is in Park (P).
3. Press SET. You will hear a beep.
2. Adjust the seat to your preferred
position.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using within 5
seconds. You will hear two beeps.
Note: Once set, stored positions can be recalled by pressing one of the
memory buttons (1 or 2) on the door.
How It Works
ONE-TOUCH TURN SIGNAL
Use this quick and convenient method to signal a lane change.
• Lightly push the turn signal lever
up or down for a three-blink
sequence.
• For a continuous signal, push the
lever up or down until it locks
into place.
How It Works
AUTO HEADLIGHTS WITH WIPER INTEGRATION
For your convenience, your vehicle’s headlights automatically turn on when the
windshield wipers operate.
Make sure your headlights are in
the AUTO position.
Turn on your windshield wipers.
The headlights also turn on.
When you turn off the windshield
wipers, the headlights turn off
shortly after.
14 Accord 2D TRG_EXL NAVI_ATG_NEW STYLE 7/18/2013 9:07 AM Page 8