Setting the clock p. 88, Setting the clock, Clock – HONDA 2015 Crosstour - Owner's Manual User Manual
Page 89
88
Co
ntrols
Setting the Clock
Clock
You can adjust the time in the clock display with the ignition switch in ON
(
w
*1
.
■
Using the Settings menu on the audio/information screen
1. Press and hold the DISP button.
2. Rotate
to select Info Settings, then
press .
u
Repeat the procedure to select Clock
Adjustment.
3. Rotate
to change hour, then press
.
4. Rotate
to change minute, then press
.
■
Using the audio touch screen
1. Select .
2. Select Clock.
3. Adjust the hours and minutes by selecting
/
.
4. Select 12H or 24H.
5. Press Set to set the time.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Adjusting the Time
1
The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
These indications are used to show how to operate
the selector knob or the MENU/SEL (Selector) knob.
Rotate
to
select.
Press
to enter.
You can customize the clock display to show the 12
hour clock or 24 hour clock.
You can turn the clock display on and off.
Models with navigation system
Models without navigation system
Models with audio touch screen
Models without navigation system
Models with audio touch screen
3 4
* Not available on all models
15 CROSSTOUR-31TP66500.book 88 ページ ２０１４年７月３１日 木曜日 午後３時２３分