HONDA 2015 Crosstour (EX) - Technology Reference Guide - Manual (Page 7)

10 11
BLUETOOTH ® HANDSFREELINK ® (HFL)
How to Use HFL
Press and release the HFL Talk button before you say a command.
Making a Call
1. Say “Call” or “Dial” and the desired
phone number.
2. Say “Call” or “Dial” to continue.
3. The call is connected and heard
through the vehicle’s speakers.
Receiving a Call
Press the HFL Talk button
to accept the call. Press the HFL Back button
to end or decline the call.
A notification is heard and the incoming
phone number appears on the audio display.
HFL Talk button: Give HFL
commands or answer incoming calls.
HFL Back button: End a call, go back
to the previous command, or cancel an
operation.
Make and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if this feature is compatible with your phone.
Pairing Your Phone
Press and release the HFL Talk button before you say a command.
1. Enable discovery mode on your
phone.
2. If no phone has been paired before,
the system gives you instructions.
If you are pairing an additional
phone, say “Phone setup,” then say
“Pair.”
3. HFL gives you a four-digit code that
appears on the audio display.
4. Search for HandsFreeLink from
your phone, and enter the code
when prompted. Connect to HFL.
5. HFL asks you to name the phone.
For example, say “Mary’s phone.”
The phone is now added.
You can only pair your phone when the vehicle is stopped.
Call a 10-digit phone number.
Press and release the HFL Talk button before you say a command.
HFL Phonebook
Store up to 50 names and their phone numbers, which can be used as speed dials.
1. Say “Phonebook.”
2. Say “Store.”
3. Say the name of the contact, and
then the phone number.
3. To call a contact once an entry is
stored, say “Call Mike.”
15 Crosstour_Ex_TRG_AQS51526_ATG_NEW STYLE 9/9/2014 3:23 PM Page 7