Haltech IQ3 Logger Dash - Manual (Page 5)

18) Click Send Configuration. The new units should be displayed on your IQ3 Dash. Check this value
against the displayed value in the Haltech ECU Manager software to ensure that the proper value is
being displayed.
19) Do this for all channels you wish to alter. You MUST be using Racepak Datalink II Software version 3.5.1
or newer for this to work properly.
20) Everything should now be displaying correctly and in the proper units on your IQ3 Logger Dash. For
information on connecting your IQ3 to your Haltech Platinum Series ECU, please click .
Thank you for choosing Haltech Engine Management Systems and the Racepak IQ3 as your
total solution for Engine Management and Data Acquisition.
here