Guardian Technologies F1000 - Manual (Page 2)

!
iMPorTaNT SaFETy iNSTrucTioNS
SavE ThESE iNSTrucTioNS
rEad aLL iNSTrucTioNS BEForE uSiNG ThiS aPPLiaNcE.
WarNiNG: ThE cordS, WirES aNd/or caBLES SuPPLiEd WiTh ThiS ProducT coNTaiN
chEMicaLS, iNcLudiNG LEad or LEad coMPouNdS, kNoWN To ThE STaTE oF caLiForNia
To cauSE caNcEr aNd BirTh dEFEcTS or oThEr rEProducTivE harM. WaSh haNdS
aFTEr uSiNG.
WarNiNG: When using electrical appliances, basic safety precautions
should always be followed.
To reduce the risk of fire, electric shock and injury to persons, including the following: •
To avoid fire or shock hazard, plug appliance directly into a 120V AC electrical outlet. •
Never insert fingers or any other object through the fan guards. •
Never drop or insert objects into any opening of the product. •
To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state •
speed control device.
Keep unit away from heated surfaces and open flames. •
Keep the cord away from heavy traffic areas. DO NOT let the cord hang over the edge of a table or •
counter. To avoid fire hazard, NEVER put the cord under rugs, near heaters, radiators or stoves.
To protect against electrical hazards, DO NOT immerse in water or other liquids. DO NOT use near •
water or place near a window where rain may enter and come in contact with the unit.
Close supervision is necessary when any appliance is used by or near children, or by •
disabled persons.
DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after •
the appliance malfunctions, or if it has been dropped or damaged in any manner.
DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so •
will void your warranty. Return the appliance to the appliance manufacturer for examination,
electrical or mechanical adjustment or repair.
DO NOT operate in the presence of explosive and/or flammable fumes. •
Use appliance only for its intended household use as described in this manual. Any other use •
not recommended by the manufacturer, such as commercial or industrial use, may cause fire,
electric shock or injury to persons.
DO NOT use outdoors. •
Always unplug the fan before assembly or disassembly, when moving from one location to another, •
before cleaning, or whenever the fan is not in use.
To disconnect, grip the plug and pull it from the wall outlet. Never pull the cord. •
Avoid contact with moving parts. DO NOT operate without fan grills properly in place. •
WarNiNG : This fan is equipped with a polarized alternating current line plug (one blade is
wider than the other). This plug fits into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails
to fit, contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
!
Model No. voltage Frequency rated Power
F1000 127V 60Hz 20W
SPEciFicaTioNS
oPEraTiNG iNSTrucTioNS
Set the fan base on a dry, level surface. 1.
Plug the cord into any standard 120V - AC outlet. 2.
To turn the fan ON press one of the three (3) speed buttons marked (Fig. 1): 3.
(1) LoW
(2) MEdiuM or
(3) hiGh.
* To turn the fan OFF, press the button marked with (0) oFF.
The SPEED is adjusted by pressing one of the three buttons for your desired
4.
level of cooling comfort.
E-3 E-2
BEForE oPEraTiNG FaN
Remove blue fan 'feet' from box and take out of plastic wrapping. 1.
The side with the solid outer edge - 2. Side a - will be installed facing AWAY from or furthest
from the fan. (Fig. 1)
Align the pegs on the base of the fan with the peg holes on the fan foot. (Fig. 2) 3.
Snap fan and fan foot together. (Fig. 2) 4.
Repeat with other fan foot. 5.
Fan is now ready to operate. 6.
B
Fig. 1
B a a
FaN
FaN
FooT
insert pegs into
holes on fan foot.
Fig. 2
B
a